Do’s and Do not’s of Data Recovery

Stand Alone Drive Failure & Data Recovery:

  • DO NOT open your hard drive and expose the media!!! There is nothing inside that needs the attention of a common user or do-it-yourselfer. Only a qualified hard drive data recovery engineer in a certified clean room environment should ever open a drive.
  • DO NOT try to swap circuit boards on modern drives. There may be firmware/system area conflict issues that may cause major problems.
  • DO NOT put your drive in the freezer and then try to spin it up. It is possible that moisture has condensed on the media surfaces. This WILL cause head contact if it has and will destroy the drive.
  • DO NOT listen to your friends or continue to look for home remedies on the net such as the one mentioned above, seek professional help if you value the lost data.
  • DO NOT continue to power cycle a clicking or non-responsive drive; it’s not going work for you and may make the drive unrecoverable. If it should come “ready” by some chance, the possibility of it loading the OS for you, “just one more time”, is a million to one.
  • DO NOT install recovery software on the same drive/partition that you’re lost files are on, you will overwrite them with the installation.
  • DO NOT run the recovery CD/DVD furnished with your PC mqwrecz. Most OEM helpdesk techs Don’t care about your data; they only want the hardware back on line.
  • DO try to slave your drive into a working system to check for readiness and file system integrity look at more info. You may be able to copy your data with no problem if only the OS is corrupt or if there is a hardware issue with the original host computer.
  • DO try an undelete demo from the net to see if what you’re looking for is available for recovery, if so, purchase the tool.
  • DO seek professional help if you’re not 110% sure of what you’re doing. You can learn basic recovery procedures on an expendable system.
  • DO back up your data early and often. It’s not if, it’s when.

The dangers of Software Data Recovery

When to Use Data Recovery Software… and when to not.

When a hard drive malfunction causes your computer to crash and you lose access to valuable data, it is tempting to seek out a free data recovery software solution as an alternative to a professional data recovery service.

When used properly, data recovery software makes it easy to recover deleted files emptied from the recycle bin, files lost from formatting or corruption of a hard drive, virus infection, unexpected system shutdown or software failure.

There are many free data recovery software products to choose from that support a wide variety of hard drives and removable media. Online reviews of free data recovery software outline the features and benefits of “best in breed” products available on the market today. However, most data recovery software reviews will recommend the use of hard drive data recovery software products only if you have: a duplicate copy of all the data on your hard disk drive, when you have manually deleted files or if a virus attacked and damaged your data.

Computer data recovery software has its advantages and disadvantages. Data recovery software can locate all of the files still remaining in your unused hard disk space, but even the best data recovery software cannot fix a physically failed drive. Data recovery software reviews will warn users that the improper use of data recovery software, utility software or over the counter diagnostic tools can cause further media damage or permanent data loss.

Running disk data recovery software or RAID data recovery software on physically damaged drives is the easiest way to overwrite, corrupt or destroy your precious data forever. Data recovery software scans the media and all logical data blocks when looking for information. Repeated access to the data by data recovery software during this scanning process will often cause a sector error or more significant media damage, rendering the data unrecoverable. What began as a simple recovery from corruption or deleted files could escalate into a mechanical failure: the drive ceases to respond to the scan; the machine locks up; the read/write heads start clicking; media damage occurs; data is lost vytorin generic.

Tips for Using Data Recovery Software:

  1. If a drive is making scraping, tapping, clicking or humming sounds, do not attempt to install even the best data recovery software. Power down the system immediately.
  2. If the drive spins up but the motor won’t release, there could be a problem with the hard disk. Running even the best data recovery software is not recommended.
  3. Do not install data recovery softwares on the same drive from which you are trying to recover data. Installed software might actually overwrite the data you’re trying to recover.
  4. Backing up data is the only way to guarantee a complete recovery of lost files caused by hardware failure, firmware failure, media damage or file corruption. If your data is not backed up, a professional data recovery service is your best option for recovering your lost data.
  5. The first recovery attempt is the best opportunity for success, and the recovery method you choose can greatly impact the outcome. Call a professional data recovery service provider if you have lost critical data. Don’t risk losing it forever by running data recovery software.

Other methods on the internet such as freezing the hard drive or banging on the drive cause more damage to the drive as well. Contrary to popular belief, hard drives are NOT sealed. Freezing them causes moisture to get into the drive and corrosion begins almost immediately. Hitting the hard drive is likely to cause more damage, and do little to fix the issue.

If you are reading these tips, chances are you have lost something very important-and you want it back. Your next decision is critical. Our engineers use the safest methods available to insure your data is not lost from repeated recovery attempts. If you have lost data that you absolutely cannot live without, we can save it!